Aida Imaging IPComm-PoE
Portable Wireless Video & Control Transmitter with PoE+Injection/NPF Battery Support (NPF Battery not included)
SKU: IPCOMM-POE
With the power to inject PoE+ power into any camera via DC12V or a NPF-Battery (not included), you can easily take your video creations wirelessly onto any Wi-Fi router, sending IP video or IP control flawlessly as far as your router can reach.
Ask our team about our Price Match Pledge.
Get in touch
In stock
Usually Ships in 1-2 Days
Lets face it. Wireless transmission has never been the solution to live streaming.. That was until the IPCOMM-POE came along.
With the power to inject PoE+ power into any camera via DC12V or a NPF-Battery (not included), you can easily take your video creations wirelessly onto any Wi-Fi router, sending IP video or IP control flawlessly as far as your router can reach.
This solution brings a whole new level of broadcasting opportunity for on-the-go, non-mounting solutions! So bring on this revolution, and start streaming wireless today.
- Give any IP based camera wireless functionality to submit video or control over most WiFi based routers/networks.
- PoE+ injector to power any IP camera connected to (if supported)
- Capability of using DC12V power tap, or a NPF battery series to power the camera without use of DC12V port.
- Bottom of the IPCOMM-PoE has 3 1/4-20” mounting holes for perfect
fitment - Provides a wireless solution to hard-to-reach or unmountable camera
setups in any workflow. - Can be paired with multiple IPCOMM-PoE’s for multi-cam workflows.
- Performance based off of overall bitrate, not resolution. Keep in mind of these rules:
- 1.Limit the amount of obstacles between the router and IPCOMM-POE
- 2. Ensure the signal strength seen when setting the IPCOMM-POE up is above 60%
- 3. Ensure the bandwidth sent by the camera to the router is within 2Kbps~50kbps, this mostly depends on your signal strength. Anything higher will cause delay and video rupturing.
- 4. To avoid power loss, plug in DC12V to keep IPCOMM-PoE running, anda swap batteries if needed.
Transmission
- Antennas: 4 x 3dBi Dual Band Omni-Directional
- Wireless Standard: IEEE802.11ac/a/b/g/n
- Transmission Rate: Up to 80 Mbps
- RF Parameters: Receiver Sensitivity: -96dBm
Freq: 2.412~2.472GHz 5.180~5.725GHz - Channel Bandiwdth: 20/40/80 MHz, AUTO
- Encryption: WPA-PSK / WPA2-PSK / WPA/WPA2
Physical
- Physical Ports: RJ45 Port, 12VDC port, NPF Battery Slot
- Case: Hardened Aluminum
- PoE+ Port Standard: Up to IEEE 802.3at
- Indicators: PWR, PoE+ and NPF Battery Status
- Switch: On and Off
- Operating Temp: 0°C ~ 55°C
Expertise
Our team of audio experts are here to help you find the right solution for your studio.
Get in touch
ESV Insight
AUTHORISED DEALER
Genuine products with full
warranty and support
EXPERT ADVICE
Speak to real people
who know their gear.
FAMILY-RUN
A personal friendly service
you can rely upon.
TRUSTED
Studios, broadcasters and
creators across the UK.
FAST & FREE
Free UK delivery
on orders over £249