DiGiGrid DLI Audio Interface
Audio Interface for Pro Tools Systems
MPN: DIGIGRID-X-DG-DLI SKU: DIGIGRID-X-DG-DLI
DiGiGrid DLI is a networking hub that bridges Pro Tools and SoundGrid. With two DigiLink ports giving you as many as 64 digital inputs and outputs, DiGiGrid DLI helps you get the most out of your existing Pro Tools system.
Ask our team about our Price Match Pledge.
Get in touch
In stock
Delays in Production. Please Call Before Ordering.
DiGiGrid DLI is a networking hub that bridges Pro Tools and SoundGrid. With two DigiLink ports giving you as many as 64 digital inputs and outputs, DiGiGrid DLI helps you get the most out of your existing Pro Tools system.
Add a SoundGrid DSP server to your DLI, and you will enjoy unequaled processing power, with more options for recording, monitoring and mixing in real time. With full plugin integration inside your DAW, DLI lets you run hundreds of Waves and third-party SoundGrid-compatible plugins with near-zero latency of only 0.8 milliseconds.
DiGiGrid DLS has two modes, I/O and SGP:
In I/O mode, DLS bridges your Pro Tools system with the device’s built-in DSP server. The Pro Tools system (HD/HDX or HD Native) continues to be your playback engine, while DLS appears as individual I/Os from which you can expand your studio: just connect additional DiGiGrid I/Os and use additional SoundGrid servers to process your plugins.
In SGP mode, DLS bridges the DAW of your choice (Logic, Cubase, Nuendo, Ableton, Pro Tools Native, etc.) with SoundGrid applications and ASIO/Core Audio drivers and lets you control various DigiLink-compatible I/Os. In addition, you can offload your plugin processing to the device’s built-in DSP server.
In both modes, a single Cat 5e or Cat 6 Ethernet cable will enable you to connect your system to additional DiGiGrid I/Os.
Videos
Using DiGiGrid DLS and DLI with Pro Tools
Allocating I/Os in the SoundGrid Studio Network
Using DiGiGrid DLS and DLI with Pro Tools HD Native
Using a DiGiGrid DLS and DLI with Pro Tools HDX
Bridge DigiLink I/Os with SoundGrid Studio Using a DiGiGrid DLS/DLI
DiGiGrid DLI/DLS for Pro Tools I/Os with No Pro Tools Card
Waves SoundGrid Studio System Overview
Waves SoundGrid Studio Application
Waves eMotion ST Mixer Overview
- 2 DigiLink ports allowing as many as 64 digital inputs and outputs
- Bridges Pro Tools HD/HDX and HD Native systems with SoundGrid
- Allows seamless use of various DigiLink-compatible I/Os with any native DAW
- Compatible with the SoundGrid Studio ASIO/Core Audio driver
- Compatible with MultiRack
- Connects via a single Ethernet cable (Cat 5e or Cat 6)
2 DiGiLink ports with 64 channels (32 channels per port) in either I/O or SGP mode
- I/O mode: DLI acts as an interface connected to HD Core, HD Accel, HDX, or HD Native cards; supports Pro Tools TDM 10.x and 11.x (see SoundGrid Studio for a list of compatible Pro Tools versions) [LINK would be provided later]
- SGP mode: DLS acts as a controller for DigiLink-enabled I/Os (Digi192, Digi96, HD Omni, HD I/O, Apogee Symphony I/O, Lynx Aurora 8, Lynx Aurora 16)
2 SoundGrid RJ45 Ethernet ports
1 AC input
1 Word Clock/Loop Sync I/O
1 USB port
1U rackmount
Supported sample rates: 44.1, 48, 88.2 and 96 kHz (176.4 and 192 kHz will be supported in the future)
Recovery switch
Clocking options: Word Clock/Loop Sync, SoundGrid (SoE), or DigiLink
Expertise
Our team of audio experts are here to help you find the right solution for your studio.
Get in touch
ESV Insight
AUTHORISED DEALER
Genuine products with full
warranty and support
EXPERT ADVICE
Speak to real people
who know their gear.
FAMILY-RUN
A personal friendly service
you can rely upon.
TRUSTED
Studios, broadcasters and
creators across the UK.
FAST & FREE
Free UK delivery
on orders over £249