Neumann N 248 Microphone Power Supply
Neumann
008537
Large Diaphragm Cardioid Vocal Condenser Microphone
MPN: TLM-49 SKU: 008550
During the development phase, the sound was adjusted in extensive practical tests, so as to make the TLM 49 ideal particularly for vocal and speech recording. However, in addition, it is also suitable for instrumental applications in professional production studios and demanding home recordings.
Ask our team about our Price Match Pledge.
Get in touchIn stock
Usually Ships in 10-14 Days
Neumann’s TLM 49 is specifically tailored for vocal performance. A large-diaphragm studio microphone with a cardioid directional nature and a warm sound, it ships as a package with an elastic suspension.
Of course, the TLM 49 has the classic Neumann fine matte nickel finish. The design tips its hat to the legendary M 49 and M 50 microphones of the 1950s. The U 47 and the M 49 also act as inspiration for the mic’s “sound design”. The TLM 49 guarantees low self-noise and use of high gain levels, by pairing its vintage aesthetic with established Neumann transformerless circuit technology.
Thanks to the unique capsule construction, the TLM 49’s large-diaphragm capsule delivers a cardioid directional characteristic with a tendency toward supercardioid. High frequencies are more directional, as was the case with the M 49. The capsule diameter is 34 mm.
Also deployed in the M 49 and the U 47, the TLM 49 utilises the renowned K 47 capsule. The capsule is guarded by a big microphone headgrille, which is acoustically expansive and therefore sound neutral. It has a linear frequency response up to the upper mid-range. Above 2 kHz there is a gentle presence boost up to 3 dB.
Acoustical operating principle: Pressure gradient transducer
Directional pattern: Cardioid
Frequency range: 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm: 13 mV/Pa
Rated impedance: 50 ohms
Rated load impedance: 1 kohms
Equivalent noise level,: 23 dB
Signal-to-noise ratio, (rel. 94 dB SPL): 71 dB
Maximum SPL for THD < 0.5 %: 110 dB
Maximum SPL for THD < 5 %: 29 dB
Maximum output voltage for THD < 7%: 11 dBu
Dyn. range of the mic. amplifier /A-weighted, 0.5 %: 98 dB
Dyn. range of the mic. amplifier /A-weighted, 5 %: 117 dB
Supply voltage (P48, IEC 61938): 48 V ± 4 V
Current consumption (P48, IEC 61938): 3.2 mA
Matching connector: XLR 3F
Dimensions and Weight
Our team of audio experts are here to help you find the right solution for your studio.
Get in touchGenuine products with full
warranty and support

Speak to real people
who know their gear.

A personal friendly service
you can rely upon.
Studios, broadcasters and
creators across the UK.
Free UK delivery
on orders over £249