Neumann EA 89 A Elastic Suspension Microphone Mount
Neumann
007195
Dual Diaphragm 5-Directional Universal Studio Condenser Microphone
MPN: U-89-I SKU: 006449
The U 89 i is similar in appearance to the U 87. It is of smaller size, and lighter weight. It features five instead of three directional characteristics and a higher maximum sound pressure level which make this microphone easier adaptable to different applications.
Ask our team about our Price Match Pledge.
Get in touchIn stock
Usually Ships in 10-14 Days
Neumann’s U 89 i is visually similar to the U 87. It offers five as opposed to three directional characteristics and a higher maximum sound pressure level, making this microphone far more adaptable to different applications, as well as having smaller dimensions and weighing significantly less too.
The U 89 is a studio microphone for universal applications. A dual-diaphragm capsule is guarded by the headgrille, and a rotary switch below can be used to alternate through five different polar patterns. The end result is that the microphone can be adjusted simply to suit any circumstance. Hefty sound sources, those that are spread wide apart, or recorded at a larger distance.
The amplifier receives sound pressure levels up to 134 dB without distortion. This figure can be increased to 140 dB. A further rotary switch engages a filter that changes the low frequency response either below 80 Hz or 160 Hz frequency.
Acoustical operating principle: Pressure gradient transducer
Directional pattern: Omnidirectional, wide-angle, cardioid, hyper-cardioid figure-8 plus
Frequency range: 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm: 8 mV/Pa
Rated impedance: 150 ohms
Rated load impedance: 1 kohms
Equivalent noise level, : 28 dB
Equivalent noise level, A-weighted: 17 dB-A
Signal-to-noise ratio, CCIR (rel. 94 dB SPL): 66 dB
Signal-to-noise ratio, A-weighted (rel. 94 dB SPL): 77 dB (cardioid)
Maximum SPL for THD 0.5%: 134 dB
Maximum SPL for THD 0.5% with preattenuation: 140 dB
Maximum output voltage: 800 mV
Dynamic range of the microphone amplifier (A-weighted): 117 dB
Supply voltage (P48, IEC 61938): 48 V ± 4 V
Current consumption (P48, IEC 61938): 0.8 mA
Matching connectors: XLR3F
Colour: Nickel
Dimensions and Weight
Our team of audio experts are here to help you find the right solution for your studio.
Get in touchGenuine products with full
warranty and support

Speak to real people
who know their gear.

A personal friendly service
you can rely upon.
Studios, broadcasters and
creators across the UK.
Free UK delivery
on orders over £249